Hard Surface Floor Care.

Learn how to keep it looking great while standing up to the toughest household conditions.

Maintenance Guidelines:

  • Use a damp cloth to blot up spills as soon as they happen. Never allow liquids to stand on your floor.
  • For tough spots, such as oil, paint, markers, lipstick, ink, or tar, use acetone/nail polish remover on a clean white cloth, then wipe the area with a damp cloth to remove any remaining residue. Double check with your local Flooring Advisor to make sure you do not void any warranties. Test an inconspicuous area first!
  • Sweep, dust, or vacuum the floor regularly with the hard floor attachment (not the beater bar) to prevent accumulation of dirt and grit that can scratch or dull the floor finish.
  • Periodically clean the floor with cleaning products made specifically for hardwood or laminate floor care.
    Protect your flooring to keep it looking new:
  • Entry mats will help collect the dirt, sand, grit, and other substances such as oil, asphalt, or driveway sealer that might otherwise be tracked onto your floor.
  • To prevent slippage of area rugs, use an approved vinyl rug underlayment.
  • Use floor protectors and wide-load bearing leg bases/rollers to minimize the chance of indentations and scratches from heavy objects. As a rule, the heavier the object, the wider the floor protector.
  • Avoid excessive exposure to water during periods of inclement weather.
  • Keep your pets nails trimmed to prevent them from scratching your floor.
  • Never try to slide heavy objects across the floor.
  • A protective mat should be used for furniture or chairs with castors.

While cleaning is easy, there are a few things to avoid:

  • Don't use oil based, wax, polish, or strong ammoniated or abrasive cleaners.
  • Don't use steel wool or scouring powder.
  • Don't wash or wet-mop the floor with soap, water, oil-soap detergent, or any other liquid cleaning material. This could cause swelling, warping, delamination, and joint-line separation, and void the warranty.
  • Don't use any type of buffing machine.

Content thanks in part to Shaw Floors.